4-10 business days delivery*. Items are shipped from the UK to Ireland on DAP Incoterms. This means we do not charge Irish VAT but Irish import VAT of 23%, import duty (on some products) and customs charges will be due. These fees will need to be paid to the courier before or after you receive the goods. Learn more.
Pair of 2330mm long x 280mm wide, straight single piece aluminium ramps. Ideal for use at home when loading or moving machines that weigh up to 1360kg. Price and capacity stated is for the PAIR.
Aluminium Loading Ramp - Pair (2330mm x 280mm - 1360kg)
Length (mm)
2330
Internal Width (mm)
280
Total Width (mm)
305
Min. Load Height (mm)
555
Max Load Height (mm)
699
Weight per Ramp (kg)
7.1
Weight Per Pair (kg)
14.2
Capacity (kg)
1360
Ramp Capacity, Length & Load Height
This guide should help you gauge how long a ramp you require, so if you're in any doubt read the details below. If you still have questions after reading, feel free to give us a call. The crucial thing to know is your load height.
Load Height: this is the vertical measurement from the ground to where you rest the ramp onto.
Guide to the maximum load height is shown in the product description/table, please note the minimum Load Height will be 5% below the maximum height stated on the ramp, to calculate use (maximum load height - 5% = minimum load height).
For vehicle ramps EU guidelines recommend that no ramps with a gradient greater than 30% or 1:3.3 should be used. Essentially the load heightx 3.3,gives you your ramp length. Furthermore no TUV Certified Ramp is designed to exceed this gradient. Going over this gradient is can cause accident, injury or death and may invalidate the warranty.
Please check the wheelbase measurement of the machine you are loading is suitable for the capacity the ramp can take based on the wheelbase measurement advised. To check your wheelbase, look at the vehicle from side view, the distance between the centre of front wheel and rear wheel (rim centre) is your wheelbase.
For machines with an unbalanced weight distribution such as, scissors lifts, paving machinery, steel tracked machinery and machines with low ground clearance we would advise you contact us first, so we can check and advise on the most suitable solution.
For loading cars and other vehicles with either a) Low ground clearance b) Front and/or Rear overhang a gentler gradient is recommended (this will vary depending upon the vehicle). Please also note that most forklifts and pallet trucks are not built to be used on slopes. Please check the manual for the gradient information.
Further information can be seen in this blog article here
Easy to Fit
One Year Warranty
Description
ATV Loading Ramp TRP-2330
Ramps lie flat for easy storage when not being used
Suitable for lawnmowers,ATV/dirt bikes and other wheeled garden machinery/Use as a pair
Suitable for motorcycle,scooter and other two wheel garden machinery/Use as piece
Curved ramps for improved ground clearance
Manufactured from lightweight aircraft grade aluminium (type 6005A)
Lightweight for easy handling and compliance with Health & Safety Guidelines
Tested to 200% loading capacity
Angled foot, this allows for smooth access onto the ramp when using wheeled vehicles
Flat-top/no edge design gives greater flexibility of use
Not suitable for mini diggers,mini excavators, or any similar machineries either on wheels or tracks, for these type of machinery please view our TRP70 and TRP80 series.